Dodge RAM 2004.5 high-line injectors with Injector Body Modification

$4,720.00$4,890.00

Clear
SKU: N/A Category:

Description

Body modified injectors have internal modifications to the injector to lift and close the needle faster than factory injectors. Because of this faster operation you can inject the same amount of fuel with less pulse width. Injecting the same amount of fuel in less time gives the fuel air mixture more time to combust. This makes a huge difference at high rpm. Notice the dyno plot in the picture section. Although the peak power was similar, notice the power increase of almost 200hp above 4,000rpm. Ask about our Ultra BBI upgrades for your competition upgrade for up to 3,000hp!

Originally these injectors have a flow rate of 61,8 l/h @ a pressure of 100bar.
Our MY4.5 Stage 1 injectors use a nozzle flow rate of 76,2 l/h/100bar –>24% increase compared to stock
For model years 2004-2007 we utilize a 124° spray angle

These injectors are capable of up to 700rwhp. Injection quantity reduction is a simple adjustment, thanks to aftermarket tuners. Decrease fuel quantity to satisfy the needs of your current set up, or crank it up to 700 RWHP. A 10mm cp3 is a must

Stage 1.5 injectors use a nozzle flow rate of 88,2 l/h/100bar –>43% increase compared to stock
For model years 2004-2007 we utilize a 124° spray angle

These injectors are capable of up to 850 rwhp. Decrease fuel quantity to satisfy the needs of your current set up, or crank it up to 850 RWHP. A 12mm cp3 is a must

Additional information

Stage

Stage 1, Stage 1.5

Type (Street Only)

Engine Model