Dodge RAM 2007 6.7L high-line injectors

$2,875.00$4,250.00

Clear
SKU: N/A Categories: ,

Description

Stage 0.1: injectors are using the MY13 Bosch OEM nozzle. They are only adjusted to have a little longer hydraulic injection duration compared to stock which leads to the following injection quantity increases:

MY07 14% more injection quantity compared to stock.

MY13 4% more injection quantity compared to stock.
MY07 OEM: ~150mm³
Stage 0.75: ~190mm³
Stage 1.5: ~210mm³

BBI injectors are adjusted to meet our BBI tolerances as a full set, so you get a much tighter set compared to just buying new Bosch injectors.

Stage 0.75: Nozzle flow rate of 96l/h/100bar –> 45% increase compared to stock MY07, 33% increase compared to stock MY13

These injectors use the same nozzle flow as Stage 1.5 injectors and are capable of up to 800rwhp. While it is considered a race injector, they will perform superbly in a daily driven truck with no disadvantages. True to our tradition we are building these injectors by hand, to the highest standards available. To reach the 800hp range a upgraded or dual cp3 system is a must.

Compared to Stage 1.5´s they are detuned to lower emissions and exhaust gas temperatures. An increase in fuel economy will be noticed as they have a shorter injection duration, with the same energizing time as the OEM injectors. This makes the Stage 0.75 a perfect towing injector.

Stage 1.5: Nozzle flow rate of 96l/h/100bar –> 45% increase compared to stock MY07, 33% increase compared to stock MY13

These injectors are capable of up to 900rwhp. While it is considered a race injector, they will perform superbly in all situations. True to our tradition we are building these injectors by hand, to the highest standards available. To reach the 900hp 12mm Exergy cp3 is recommended.

Stage 3: Nozzle flow rate of 120l/h/100bar –> 82% increase compared to stock MY07, 67% increase compared to stock MY13

Power output will depend upon the capabilities of your particular build. 1000hp and above is what can be expected of a quality build.

Stage 4: Nozzle flow rate of 156l/h/100bar –> 136% increase compared to stock MY07, 117% increase compared to stock MY13

The ultimate 6.7 injector (as long as the market doesn’t ask for more). Power output will depend upon the capabilities of your particular build. 1000hp and way beyond is what can be expected of a quality build. A dual cp3 system or an Exergy 14mm cp3 is a must up to 1500hp, or two 14mm pumps up to 2400hp

Additional information

Stage

Stage 0.1, Stage .75, Stage 1.5, Stage 3, Stage 4

Type (Street Only)

Engine Model